Multifoilsdirect Weekday Free Tape 24 Banner

Fast Next Day DeliveryFast Next Working Day Delivery

Bulk Discounts AvailableBulk Discounts Available

Fast Next Day Delivery Order Pre 2pm for Delivery

Technical Information

On this page you can find technical details and resources related to SuperQuilt. You can view and download data sheets, fitting guides and accreditation certificates. We have also included some of our most frequently asked questions and some helpful video guides.

U-Value Calculator

We have an easy to use, free online U-value calculator which gives you instant insulation solutions to suit your specific requirements. You are guided through the calculation step by step, with helpful hints along the way.

U-Value Calculator

Data Sheets & Certificates

picture_as_pdf Data Sheets: SuperQuilt for Roofs, Walls & Floors
receipt Certificates: SuperQuilt BDA / SuperQuilt BBA

Insulation Solutions

SuperQuilt insulation is extremely versatile and can be used in many applications. A selection of common solutions can be found below, however if you are unable to find what you require please see our complete list of insulation solutions.

Solid Existing Floor

YBS SuperQuilt is a commonly used solution to insulate existing solid floors due to a simple and quick installation. SuperQuilt is LABC & BDA certified for floating floor applications.

View Installation Guide

Timber Frame

YBS SuperQuilt has been proven to save on labour time, cost and space - in timber frame buildings. It is most commonly applied to the internal side of timber studs before the plasterboard and it incorporates a high performance vapour barrier.

View Installation Guide

Re-Roofing Complete Systems

YBS SuperQuilt and YBS BreatherQuilt are fully LABC & BDA certified products to be used in re-roofing systems. SuperQuilt Insulation's solutions can assist in achieving U-values in new build and refurbishment / extension projects.

View Installation Guide

Pitched Roof

YBS SuperQuilt Multifoil Insulation is fully LABC, BDA and BBA certified for insulating pitched roofs. It is most often used to the internal side of the rafters before the plasterboard is installed to reduce head height and save on costs.

View Installation Guide

Dry Lining

YBS SuperQuilt is the ideal solution for insulating the internal of solid brickwork and concrete block walls. SuperQuilt is fully certified for the use in dry linings and commonly achieves refurbishment regulations without additional insulation.

View Installation Guide

Frequently Asked Questions

Here are some answers to the questions we get asked the most. If you are not able to find what you are looking for then please look in our complete list of frequently asked questions.

What are your shipping charges?

The cost of shipping is dependent on the value of your order.

For every £100 spent, the shipping fee increases £10. This is up until £600, where the fee then increases by £5

Additional surcharges are applied for Highlands, Offshore Islands and Nothern/Sothern Ireland.

Deliveries to Jersey & Guernsey must be delivered on Pallet Networks as opposed to parcels.

Deliveries to Scottish highlands and offshore islands can be sent by parcels or pallets, dependent on quantity ordered.

Which insulation is best to use in a conservatory?

The best multifoil to use when insulating a conservatory roof would be our EcoQuilt Expert this is due to the material being thinner when compacted, lighter and easier to install overhead.

Although SuperQuilt can also be used under a conservatory roof too, it just doesn’t compress as much as Ecoquilt, lowering the ceiling height.

Do I need to leave an air gap either side of multifoils when installing?

Yes, to get the maximum thermal performance from our multifoils, it is essential to leave an airspace either side of the product.

This allows them to reflect and perform to their highest potential. If space either side isn’t possible, then at least one airspace is vital.


How do I work out how many rolls of ThermaSeal Foil Joining Tape l will need?

On average, we recommend using one roll of ThermaSeal Foil Joining Tape for every 30 Square Metres of Material.

Thermaseal Foil Joining Tape comes on 75mm x 50m Rolls. Please visit our Things You’ll Need page to purchase this and view other handy products you may require for your project.

What does the term R-Value mean?

An R-Value is a measure of resistance to the flow of heat through a given thickness of a material, such as insulation. Higher numbers indicate better insulating properties.

Video Guides

Here are some helpful video guides demonstrating how to use SuperQuilt and other products. If you are not able to find what you are looking for then please look in our complete list of how-to videos.

How to Fit SuperQuilt Under Rafter

This video demonstrates how to insulate under your rafters with SuperQuilt Insulation. It shows a double layer install, but you can just install one layer tort under the roof rafters if preferred.

How To Insulate Your Conservatory

How to Insulate Walls with SuperQuilt

How to Insulate Walls with SuperQuilt - Achieve Building Regulations with 1 Layer!

How To Insulate Solid Walls in Less Space, Cost and Installation time vs Kingspan (PIR Insulation)

SuperQuilt is also LABC, BBA & BDA Certified for these other applications;
Pitched Roofs
Flat Roofs
Dwarf Walls
Timber Frames
Suspended Timber Floors
Solid Floors
Crawl Spaces

How To Insulate Under Carpets, Laminate or Vinyl

How To Insulate Under Floors Logo